Furnace Pros Idaho logo Furnace Pros Idaho
Get Estimate
Browse Services
Service Areas
Call (833) 588-3865

Furnace Repair in Idaho: Heat Back On, Fast

Furnace Repair in Idaho means a licensed tech at your door with the parts to fix it, not a sales pitch. We cover Boise, Idaho Falls, Coeur d'Alene, Twin Falls, Pocatello and every town between. When your furnace quits in a January cold snap, we diagnose it, quote it, and fix it the same visit.

  • Licensed & Insured
  • Transparent Pricing
  • Same-Day Service
  • 24/7 Emergency
Call Now for Service Or get a free estimate
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed Workmanship Guaranteed
Focused close-up of a person soldering a printed circuit board under a desk lamp.
On the job

15+

Years Local Trade

Statewide Furnace Repair in Idaho You Can Count On

Furnace Pros Idaho is a statewide furnace service company built for one job: getting heat back into Idaho homes. From the Treasure Valley to the Snake River Plain, the Panhandle to the high country around McCall and Driggs, we run service trucks stocked with igniters, flame sensors, blower motors and control boards so most repairs finish on the first visit.

What separates us is dispatch coverage, not slogans. We route techs out of Boise, Idaho Falls, Coeur d'Alene and Twin Falls so a no-heat call in Nampa gets the same response as one in Rexburg. Every tech carries NATE Certification, works to ACCA Standards, and follows EPA Section 608 handling rules on refrigerant and combustion work. If you need an hvac contractor near me at 2 a.m. in January, that coverage is the difference.

3,200+

Jobs Completed

4.9★

Google Rating

24/7

Emergency Line

Furnace Repair and Installation Idaho Services

One crew handles everything from a dead thermocouple to a full system swap. We service gas, electric and high-efficiency furnaces across Idaho, and we stock Carrier, Trane, Lennox, Goodman, Rheem, York, Bryant, American Standard, Amana and Coleman parts on the truck. That means fewer return trips and a shorter wait in a cold house.

Detailed view of torch welding metal surface, featuring blue flame.

Furnace Repair

Our core service: diagnosing and fixing no-heat, weak-heat and short-cycling furnaces. We test the igniter, flame sensor, gas valve, limit switch and control board with a multimeter and combustion analyzer, then repair what's actually failed. Typical repairs run two to four hours.

View Details
Close-up of hands adjusting a boiler system with precise instrumentation, showing maintenance work.

Emergency Furnace Repair

No heat at 2 a.m. in a Boise cold snap or a power flicker in Post Falls? We run 24/7 emergency dispatch statewide. Techs carry spare blower motors, capacitors and thermocouples so most emergency calls end with heat the same night.

View Details
An electrician carefully examines a residential fuse box indoors, ensuring electrical safety and compliance.

Furnace Installation

New furnace going in? We size it to your home with a load calculation, not a guess, and set it to ACCA Standards. We handle gas line checks, venting, and the Idaho HVAC Contractor License paperwork so the install passes inspection the first time.

View Details
Two auto mechanics engaged in vehicle repair work inside a dimly lit garage.

Furnace Replacement

When a cracked heat exchanger or a 20-year-old unit makes repair a losing bet, we replace it. We haul the old furnace out, set the new one, and commission it with a combustion analyzer. Most replacements finish in one day, including cleanup.

View Details
Detailed view of metal components in an automotive workshop. Focus on a cylindrical piece.

Furnace Tune-Up

A fall tune-up catches dirty flame sensors, worn capacitors and clogged filters before they strand you in January. We clean, test and adjust the whole system, then log the readings so you know exactly what shape your furnace is in.

View Details
Hands tending to a warm, burning fireplace indoors, capturing the essence of comfort.

Furnace Maintenance

Yearly maintenance keeps efficiency up and breakdowns down. We inspect the heat exchanger for cracks, check the inducer motor and limit switch, verify gas pressure, and replace the air filter. It's the cheapest insurance a furnace owner in Idaho can buy.

View Details
A professional cleaner in a red uniform holding a vacuum near a van, ready for service.

Furnace Cleaning

Dust, pet hair and burnoff residue choke airflow and drive up gas bills. We pull the burners, brush the tubes, clean the blower wheel and vacuum the cabinet. A clean furnace runs quieter, heats faster and lasts longer in Idaho's dusty spring air.

View Details
A skilled technician works with a welding torch in an industrial setting, highlighting craftsmanship.

Gas Furnace Repair

Gas smells, pilot light outages, delayed ignition and furnace burning smell calls all get same-day attention. We pressure-test the gas valve, check the thermocouple and flue, and confirm combustion readings with a flue gas analyzer before we leave.

View Details
Detailed view of a glowing electric heating element with a coiled structure emitting heat.

Electric Furnace Repair

Electric furnaces fail differently: tripped breakers, dead heating elements, bad sequencers and thermostat malfunction. We trace the circuit with a clamp meter, replace failed components, and verify amp draw on every element before calling it fixed.

View Details
Technician repairing an air conditioner unit outdoors, wearing a facemask and using a manifold gauge.

High-Efficiency Furnace Repair

Condensing furnaces with PVC venting and secondary heat exchangers need a tech who knows them. We service 90%+ units, clear condensate drain clogs that cause furnace leaking water, and tune them with an anemometer and combustion analyzer for peak efficiency.

View Details

Why Idaho Homeowners Call Us First

Furnace Repair in Idaho is a cold-weather emergency business, and we treat it that way. Licensed, insured and bonded, with techs who carry the tools and parts to finish the job on the first visit instead of scheduling a return trip.

  • Statewide Dispatch, Real Coverage We route trucks out of Boise, Idaho Falls, Coeur d'Alene and Twin Falls, so a no-heat call in Meridian or Pocatello gets a real ETA, not a promise. Most metro calls land a tech within hours, and rural routes get scheduled the same day.
  • Certified Techs, Code-Correct Work Every technician holds NATE Certification and works to ACCA Standards and ANSI/ASHRAE Standards. We follow EPA Section 608 rules on combustion and refrigerant handling, and we pull the Idaho HVAC Contractor License permits when the job needs one.
  • Upfront Pricing, No Surprise Invoices You get the diagnosis and a flat price before we turn a wrench. No hidden fees, no upsell scripts. If the repair is a bad capacitor, that's what you pay for, not a new furnace you didn't need.
Close-up of an old rusty furnace door set in a weathered concrete wall, showing vintage industrial design.

98%

Of our customers refer us within the first year.

Furnace Repair Pricing in Idaho

Typical 2026 pricing for Furnace Repair in Idaho, quoted upfront before any work starts. Diagnostic fee is credited toward the repair, and you approve the number before we begin.

Diagnostic and Minor Fix

$129-$249 flat rate

  • Full system diagnostic with multimeter and combustion analyzer
  • Thermocouple, igniter or flame sensor replacement
  • Air filter swap and airflow check
  • Written quote before any repair begins
Book This Plan
Most Popular

Standard Component Repair

$350-$850 typical job

  • Gas valve, blower motor or inducer motor replacement
  • Capacitor, limit switch or control board repair
  • Combustion testing and gas pressure verification
  • Same-day parts from our stocked trucks
Book This Plan

Major Repair or Replacement

$1,200-$4,500 per project

  • Heat exchanger replacement or full furnace replacement
  • New high-efficiency unit sized by load calculation
  • Permit handling and code-correct venting
  • Old equipment hauled away and system commissioned
Book This Plan

How Our Furnace Repair Process Works

No mystery, no waiting around. Here's exactly what happens from the moment you call until the heat is back on in your Idaho home.

01

Call and Dispatch

You call (833) 588-3865 and talk to a real person, not a call center script. We confirm your address, the symptom, and send the nearest truck. Most metro calls get a tech within hours.

02

On-Site Diagnosis

The tech tests the system with a manifold gauge set, multimeter and combustion analyzer. You get a straight answer on what failed and why, plus a flat price to fix it before any work starts.

03

Repair and Test

We replace the failed part, whether that's a flame sensor, blower motor or control board, then run the furnace through a full cycle. Combustion readings and temperature rise get verified before we pack up.

04

Walkthrough and Warranty

We show you what we fixed, hand over the warranty on parts and labor, and give you a plain-English rundown on keeping the system running. If a replacement makes more sense than a repair, we tell you that too.

Furnace Problems We Fix Across Idaho

Idaho winters are hard on furnaces, and the calls we get reflect it. Here are the failures we see most, and how we get heat back on fast.

01

Furnace blowing cold air on a 10-degree Boise morning

(Our Fix)Cold air usually means a failed igniter, a dirty flame sensor or a gas valve that won't open. We test each with a multimeter and combustion analyzer, replace the failed part, and verify flame signal before we leave. Most calls are fixed the same visit.

02

Furnace short cycling and tripping the breaker in Pocatello

(Our Fix)Short cycling and breaker trips point to a clogged filter, a failing blower motor or an overheating limit switch. We check airflow, amp draw and the control board, clear the restriction, and confirm the furnace runs a full cycle without tripping.

03

Furnace not igniting after a power outage in Coeur d'Alene

(Our Fix)Power surges fry control boards and transformers. We test the board, transformer and igniter, replace what's dead, and reset the system. If the outage cracked a heat exchanger, we'll show you the evidence before recommending replacement.

04

Furnace leaking water or a burning smell in Twin Falls

(Our Fix)High-efficiency furnaces leak when the condensate drain clogs, and a burning smell usually means dust burnoff or a failing motor. We clear the drain, inspect the inducer motor and heat exchanger, and confirm the smell is gone before we leave.

05

Furnace making loud noise and rattling in Idaho Falls

(Our Fix)Banging, rattling and screeching come from loose panels, a failing blower motor bearing or a dirty burner. We tighten, clean and replace as needed, then run the furnace through heat cycles to confirm it's quiet.

Furnace Repair Coverage Across Idaho

We cover the whole state, from the Treasure Valley and Boise metro to the Snake River Plain, the Magic Valley, the Panhandle and the high country. Whether you're in a subdivision in Meridian or a cabin outside McCall, there's a truck routed your way. That's what statewide coverage means for Furnace Repair in Idaho.

Furnace Repair in Idaho: Common Questions

Straight answers to the questions Idaho homeowners ask us most about furnace repair, cost and licensing.

How much does Furnace Repair cost in Idaho?
Most Furnace Repair in Idaho runs $129 to $249 for a diagnostic and minor fix, $350 to $850 for a standard component repair, and $1,200 to $4,500 for major repairs or replacement. The diagnostic fee is credited toward the repair, and you approve the flat price before any work starts.
Who is the best hvac contractor in Idaho?
The best hvac contractor in Idaho is one with NATE-certified techs, a valid Idaho HVAC Contractor License, upfront pricing, and trucks stocked with parts. Ask about response time, warranty on parts and labor, and whether they work to ACCA Standards. We meet all of those, and we cover the whole state, not just one metro.
Are there 24/7 Furnace Repair services in Idaho?
Yes. We run 24/7 Furnace Repair Idaho near me dispatch statewide, including nights, weekends and holidays. No-heat calls get priority, and techs carry spare igniters, blower motors and capacitors so most emergency calls end with heat the same night.
How to choose an hvac contractor in Idaho?
Check three things: a valid Idaho HVAC Contractor License, NATE Certification on the techs, and a written flat price before work begins. Ask what warranty covers parts and labor, and whether they stock parts on the truck. A contractor who can't answer those clearly is one to skip.
Does Idaho require a license for hvac contractors?
Yes. Idaho requires HVAC contractors to hold a state license for installation and repair work, and permits are often needed for furnace replacement. We carry the Idaho HVAC Contractor License, pull permits when required, and work to ACCA Standards and ANSI/ASHRAE Standards on every job.

Need Furnace Repair in Idaho Tonight?

No heat is an emergency, not a wait-until-Monday problem. Call (833) 588-3865 and we'll dispatch the nearest truck, 24/7, with upfront pricing and parts on board.

Call (833) 588-3865 Call (833) 588-3865

Get Your Furnace Fixed Today

Call us at (833) 588-3865 any time, day or night. We answer live, confirm your address, and send the closest truck. Most metro calls get a tech within hours, and you'll get a flat price before any work begins. Prefer email? Reach us at [email protected] and we'll respond the same day.

Furnace Pros Idaho

  • Address

    Idaho

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Tips, Specials, & Maintenance Reminders

Once-a-month email with seasonal tips, exclusive specials, and the kind of maintenance reminders that save you a callout.

Call (833) 588-3865 Get Quote
Call Quote